Calcium formate is a white crystalline material with good flowability and slight hygroscopicity. It is soluble in water and is widely used as a setting accelerator and early strength agent in cement-based construction materials.
MATECEL supplies Calcium Formate for applications such as concrete, dry-mix mortar, and tile adhesives. By accelerating cement hardening and supporting early strength development, calcium formate helps improve the early-age performance of cementitious formulations, particularly where low temperatures may delay setting.
As a construction chemical additive, calcium formate can be incorporated into different mortar formulations to adjust setting behavior and hardening performance. Its effectiveness depends on cement composition, dosage, temperature, and the other additives used in the formulation.
Matecel® Calcium Formate Features:
Shorten the initial setup time.
Standardize the retardation of cement/mortar under low temperature conditions.
Increase the growth rate of early strength.
Shorten the time for concrete to reach its bearing capacity.
MATECEL Calcium Formate is used in concrete, dry mortar, and tile adhesive formulations. These applications benefit from its ability to accelerate cement setting and promote early strength development.
Calcium formate for concrete is primarily used as an early strength agent and setting accelerator.
In concrete formulations, calcium formate can support faster early-age hardening and strength development. This can be beneficial when production schedules or construction operations require earlier handling or progression to subsequent stages.
In precast concrete production, accelerated early strength development may help reduce the time required before demoulding, provided the concrete has achieved the necessary strength.
The actual effect depends on the cement type, mixture proportions, curing temperature, and calcium formate dosage.
Calcium formate for dry-mix mortar helps improve setting and hardening performance in cement-based formulations.
Dry-mix mortars contain cement, mineral aggregates, and functional additives that influence water retention, workability, adhesion, and strength development.
Calcium formate is particularly relevant in formulations that require:
● Shorter initial setting times
● Faster early strength development
● Improved early-age hardening under cool conditions
● Controlled setting behavior for different construction applications
When used alongside cellulose ethers or polymer additives, calcium formate serves a different function by primarily influencing cement hydration and early strength development.
Calcium formate for tile adhesive is used to adjust the setting behavior and early strength development of cement-based adhesive formulations.
Tile adhesives must provide sufficient working time during application while developing the mechanical strength required to support installed tiles.
Calcium formate can accelerate early cement hydration, helping adhesive formulations develop strength more quickly. However, excessive acceleration may reduce the available working time, so the addition level must be balanced with the overall formulation.
Its performance is also influenced by water-retaining additives, cement characteristics, and the curing environment.
The recommended calcium formate dosage depends on the application, cement composition, ambient temperature, and desired setting performance.
MATECEL's existing product guidance provides the following reference ranges:
Application Conditions Calcium Formate Dosage Reference General dry-mix mortar and concrete applications Approximately 0.5–1.0% Summer applications mentioned in the existing guidance Approximately 0.3–0.5% Upper addition level mentioned in the existing guidance Up to 2.5%
These percentages are taken from the existing MATECEL product information. The original guidance does not clearly establish the percentage calculation basis, so they should not be treated as universal formulation recommendations.
Cement composition: Different cement types and mineral compositions may respond differently to calcium formate.
Application temperature: Lower temperatures generally slow cement hydration. Calcium formate may help accelerate early hydration, but its effectiveness still depends on the overall curing conditions.
Required setting time: Higher addition levels may shorten setting time, potentially affecting the available working period.
Other formulation additives: Cellulose ethers, polymer powders, and other admixtures can influence mortar workability and early-age behavior.
Target strength development: The appropriate addition level depends on the desired early strength and overall performance of the finished material.
The final addition level should be established through formulation testing using the intended cement and other raw materials.
MATECEL supplies calcium formate for concrete, dry-mix mortar, and tile adhesive applications. If you are developing cement-based formulations or sourcing construction chemical additives, contact MATECEL to discuss your product requirements and application needs.
LEAVE A MESSAGE
Shijiazhuang Henggu Matecel Cellulose Co., Ltd.
Chemical Industrial Park, Xinji City, Hebei Province, China Post Code: 052360
Copyright 2023 Shijiazhuang Henggu Matecel Cellulose Co., Ltd. All Rights Reserved