Company News

Understanding Glass Transition Temperature (Tg) and Minimum Film Forming Temperature (MFFT) in RDP Grade Selection

Sep. 10, 2026

Selecting redispersible polymer powder (RDP) involves more than comparing price, powder appearance, or solids content. Two values frequently listed on technical data sheets—glass transition temperature (Tg) and minimum film forming temperature (MFFT)—help explain how different grades behave.

For dry-mix mortar manufacturers, understanding these parameters provides a useful starting point for comparing products. The next step is connecting those values to the intended application and verifying performance in the complete formulation.

Glass Transition Temperature Describes Polymer Behavior

Glass transition temperature describes the transition region in which a polymer changes from a relatively hard, glassy state to a softer, more mobile state as temperature increases.

For RDP selection, Tg helps indicate the polymer film’s balance of hardness and flexibility at a given temperature. It does not independently determine the strength or durability of the finished mortar.

  • Lower-Tg grades generally offer a softer polymer phase at the same service temperature.

  • Higher-Tg grades generally offer a harder polymer phase under comparable conditions.

  • Intermediate grades can provide a useful balance where both flexibility and surface firmness matter.

These differences help narrow the selection, but polymer chemistry, dosage, and the surrounding mortar matrix also influence the result.

Minimum Film Forming Temperature Relates to Film Development

MFFT is the lowest temperature at which a polymer dispersion forms a continuous film under specified test conditions. For RDP, this relates to the dispersion obtained after the powder is mixed with water.

If conditions are too cold for effective film formation, the polymer may not deliver its intended contribution to adhesion and flexibility. However, MFFT is not a guaranteed minimum installation temperature for the finished mortar. The complete product’s application requirements and curing conditions still apply.

Match RDP Selection to the Application

The most useful grade comparison begins with a clearly defined performance requirement.

  • Flexible tile adhesives and repair mortars: Consider the required balance between adhesion and deformation accommodation.

  • Exterior insulation base coats: Include flexibility and resistance to stresses caused by substrate movement in the evaluation.

  • Self-leveling compounds: Assess surface hardness and mechanical performance alongside the required flow.

  • Wall putties and skim coats: Balance surface strength, application feel, and finishing requirements.

Selecting the lowest or highest available Tg is not a reliable shortcut. A grade suitable for a flexible coating may not provide the balance required by a flooring formulation.

Discuss Your RDP Requirements with Henggu Matecel

The Henggu Matecel RDP product page presents multiple grades with different temperature characteristics and rigidity or flexibility descriptions, providing a starting point for product comparison.

For a focused selection inquiry, share your mortar application, target performance, expected application conditions, current grade, and the issue you need to resolve. Include your anticipated order quantity and destination when requesting a quotation.

Ask for current grade-specific technical data and discuss suitable samples before proceeding to production-scale approval.

Shijiazhuang Henggu Matecel Cellulose Co., Ltd.

Chemical Industrial Park, Xinji City, Hebei Province, China Post Code: 052360

Copyright 2023 Shijiazhuang Henggu Matecel Cellulose Co., Ltd. All Rights Reserved

Email: info@hpmc.com

phone: +86 139 3215 1536

Social Media:

+86 139 3215 1536

+86 13932151536

wechat

info@hpmc.com